
In short
- Break-even ACOS is the highest ACOS a product can carry before each ad-attributed sale stops making money, and it equals your margin before advertising.
- Calculate it per product: selling price minus every variable cost except advertising, divided by the selling price.
- Your target ACOS sits below break-even whenever you want advertising to leave profit behind.
- Turn ACOS into a maximum bid with selling price × conversion rate × ACOS, and review each product against its own break-even.
Break-even ACOS is the highest advertising cost of sales a product can carry before each ad-attributed sale stops making money, and it equals your profit margin before advertising. If a product keeps 40% of its selling price after product cost, Amazon fees and other variable costs, its break-even ACOS is 40%.
That single number changes how you read a campaign report. A 35% ACOS is profitable on that product and a loss on one that keeps 20%. This guide shows how to calculate the number, how to turn it into a target and a maximum bid, and which mistakes make it wrong.
What is break-even ACOS and why does it matter?
ACOS is ad spend divided by attributed sales. Amazon Ads defines it in its ACOS guide and treats it as a measure of how much you spend to generate a unit of attributed sales. On its own, it tells you nothing about profit, because it ignores what the product costs you.
Break-even ACOS adds the missing reference point. It answers one practical question: how much of this sale can I give to advertising and still not lose money on it? Without that reference, advice like "keep ACOS under 25%" is just a number somebody else found comfortable for their own margins.
In practice it does three things:
- It tells you which campaigns are losing money on each attributed sale, not merely which ones look expensive.
- It gives each product its own limit, so a high-margin product is not held to the standard of a low-margin one.
- It gives you the input for a maximum bid, which is where the decision actually lands.
How do you calculate break-even ACOS?
Take the selling price, subtract every variable cost of selling one unit except advertising, and divide what is left by the selling price.
Formula
Break-even ACOS = (selling price − variable costs before ads) ÷ selling price
Example
Here is a worked example with invented figures for a product sold at $40:
| Item | Per unit |
|---|---|
| Selling price | $40.00 |
| Product cost, including inbound freight | −$10.00 |
| Referral fee | −$6.00 |
| Fulfillment fee | −$6.50 |
| Returns, storage and other variable costs | −$1.50 |
| Margin before advertising | $16.00 |
$16 ÷ $40 = 40%. That is the break-even ACOS. The same figure expressed as a return is 1 ÷ 0.40, a break-even ROAS of 2.5.
Tip
Use your own real fees. They vary by category, size and marketplace, so take them from your settlement reports or from Amazon's selling fee pages rather than from an average.
What is the difference between break-even ACOS and target ACOS?
Break-even ACOS is the point where the attributed sale earns nothing. Target ACOS is what you actually aim for, and it is lower whenever you want advertising to leave profit behind.
To set a target, decide what margin you want to keep after ads and subtract it from the break-even figure. In the example above, keeping 10% of the price after advertising gives a target of 40% − 10% = 30%.
A target is a business decision that depends on what the product is doing for you right now:
- Launch: you may accept an ACOS above break-even for a defined period, because you are buying data and first sales. Set the limit and the end date in advance.
- Growth: a target close to break-even lets you take more volume while each attributed sale still pays for itself.
- Mature product: a lower target protects the profit the product is expected to contribute.
- Clearing stock: the calculation changes, because the alternative to selling may be storage or disposal cost.
How do you turn break-even ACOS into a maximum bid?
Multiply the selling price by the conversion rate of the keyword and by the ACOS you are willing to pay. The result is the most you can pay per click and still hit that ACOS on average.
Formula
Maximum CPC = selling price × conversion rate × ACOS
Continuing the example, with a keyword that converts 10% of clicks into orders:
- At the 40% break-even: $40 × 0.10 × 0.40 = $1.60 per click.
- At the 30% target: $40 × 0.10 × 0.30 = $1.20 per click.
A keyword costing $1.45 per click is therefore above target but still below break-even. It deserves a closer look rather than a pause. A keyword costing $1.90 loses money on each attributed sale at its current conversion rate.
Common mistake
The conversion rate needs enough clicks behind it to mean something. With very few clicks the formula produces a confident figure from noise, so aggregate at ad group or product level until the keyword has its own history.
What mistakes make the calculation wrong?
The formula is easy. The errors come from what goes into it.
- Calculating it once and forgetting it. A coupon or price change moves the result immediately. Drop the same product to $34, with the referral fee falling to $5.10 and the other costs unchanged, and the margin becomes $10.90. Break-even falls from 40% to about 32%, so a campaign that was comfortable last week may now be losing money.
- Using one average for the whole catalog. A blended margin hides the products that cannot afford the blended target. Calculate at ASIN level, or at least per product family.
- Leaving costs out. Returns, storage and inbound freight are real variable costs. Leaving them out inflates break-even and makes unprofitable campaigns look fine.
- Mixing fixed costs in. Salaries and software do not change per unit sold. Including them here makes the limit too strict. Cover them from total profit instead.
- Comparing against the wrong period. Recent days may not yet show all their attributed orders, so an ACOS read this morning for yesterday can look worse than it will end up. Judge a closed period.
- Ignoring what the sale leads to. Break-even as calculated here covers only one order. If a product has strong repeat purchases, you can decide to pay more for the first order, but make that decision with your own repeat data rather than assuming it.
How should you use break-even ACOS when reviewing campaigns?
Compare each product's ACOS with its own break-even and sort the gap, not the raw ACOS. A simple review sheet needs five columns: product, break-even ACOS, target ACOS, actual ACOS for a closed period, and the difference.
| Product (example) | Break-even | Target | Actual ACOS | Reading |
|---|---|---|---|---|
| A | 40% | 30% | 35% | Profitable, above target: review bids on the costly terms |
| B | 18% | 12% | 24% | Losing money on attributed sales despite the lowest ACOS of the three |
| C | 55% | 40% | 38% | Within target: room to test more volume |
Look at product B: sorted by raw ACOS it seems the healthiest in most reports, yet it is the only one losing money per attributed sale. That is what the extra column catches.
After changing a bid, give it time before you judge the result. Selloop evaluates each applied change from day 8 and again from day 15, because a verdict from the next morning mostly measures noise. The same discipline works in a spreadsheet: note the date and the old value, and read the result on those two days.
Frequently asked questions
Is break-even ACOS the same as profit margin?
It equals your margin before advertising, expressed as a percentage of the selling price. It is not your net profit margin, which also includes advertising and your fixed costs.
What is a good ACOS on Amazon?
There is no universal good figure. A good ACOS is one below your target for that product, and the target comes from its margin and from what you want the product to do at this stage.
How is break-even ROAS calculated?
Divide 1 by your break-even ACOS. A 40% break-even ACOS equals a break-even ROAS of 2.5, which means every unit of ad spend must bring in 2.5 units of attributed sales.
Should every campaign stay below break-even?
Not always. A launch can run above break-even on purpose, for a limited time and with a fixed limit. A mature product running above break-even for no stated reason is usually a problem to fix.
How often should I recalculate it?
Recalculate whenever price, product cost or fees change, and check the figures on a regular schedule even if nothing seems to have moved. Fee updates and new coupons are easy to miss.
Selloop syncs your Sponsored Products campaigns, proposes changes, and you apply them in Amazon with one click. Start your 7-day free trial.